Customer login  |   Contact us
Home Company Products Support Purchase
Forum Home » Network Probe

Topic: New Installation:- Not all network traffic being seen
Replies: 1   Pages: 1   Last Post: Sep 16, 2003 6:57 PM by: Eivind Pedersen


Back to Topic List Back to Topic List Topics: [ Previous | Next ]
Replies: 1   Pages: 1  
Derek Caldeira
New Installation:- Not all network traffic being seen
Posted: Sep 16, 2003 5:48 PM
  Reply

In our network configuration we have 4 3Com 10/100MB Switched hubs connected via the matrix ports. These switches are then connected to a Cisco 3550 Catalyst switch which connects our site to our ISP
Problem:
The probe and client are installed on the same machine, information been displayed does not reflect the activity of the network, only activity on its switch port. With the configuration describe what it the best way to monitor my network and where to install the probe.

Eivind Pedersen

Posts: 473
From: Oslo, Norway
Registered: Jun 11, 2002
Re: New Installation:- Not all network traffic being seen
Posted: Sep 16, 2003 6:57 PM
  Reply

You need a switch with a span port. I don't know if the Cisco 3550 have a span port.



© 1998-2019 ObjectPlanet, Inc. Øvre Slottsgate 5, 0157 Oslo, Norway Tel (+47) 2233 3360 | Fax (+47) 2233 3361