Customer login  |   Contact us
Home Company Products Support Purchase
Forum Home » Network Probe

Topic: How to use Network Probe 2.7 on Machine with 2 NICs
Replies: 1   Pages: 1   Last Post: Apr 7, 2009 6:08 PM by: geromyh


Back to Topic List Back to Topic List Topics: [ Previous | Next ]
Replies: 1   Pages: 1  
glt

Posts: 4
Registered: Nov 26, 2008
How to use Network Probe 2.7 on Machine with 2 NICs
Posted: Nov 26, 2008 4:21 PM
  Reply

Hi,

I have a machine that has 2 NICs. One card is used as the
machines access to the network, so it has a regular IP
setup (fixed IP, subnet mask 255.255.255.0 and gateway).

I added a second network card so that I can use Network
Probe to monitor a port that is mirroring all ports on
our main switch. How should the connection be set up for
this second NIC?

Cheers,
Geoff

geromyh

Posts: 4
From: Seattle, WA
Registered: Mar 24, 2009
Re: How to use Network Probe 2.7 on Machine with 2 NICs
Posted: Apr 7, 2009 6:08 PM
  Reply

If you're using Cisco gear, this is a good article to get started with:

http://www.associatedcontent.com/article/577825/configure_port_mirrors_on_cisco_switches.html?cat=15



© 1998-2019 ObjectPlanet, Inc. Øvre Slottsgate 5, 0157 Oslo, Norway Tel (+47) 2233 3360 | Fax (+47) 2233 3361