Customer login  |   Contact us
Home Company Products Support Purchase
Forum Home » Network Probe

Topic: How to setup second NIC in Network Probe
Replies: 2   Pages: 1   Last Post: Sep 18, 2008 8:23 PM by: luvizon


Back to Topic List Back to Topic List Topics: [ Previous | Next ]
Replies: 2   Pages: 1  
Yo

Posts: 1
Registered: May 12, 2008
How to setup second NIC in Network Probe
Posted: May 12, 2008 6:42 AM
  Reply

Currently running Network Probe 2.7 with a single NIC on an XP machine.

Needs to monitor another spanned port on the same local subnet.

After adding the second nic, how should I setup the second nic in XP ?
Another static ip address ?
What about gateway address , dns and wins ?

Regards,
Yo

markus

Posts: 9
From: Oslo
Registered: May 23, 2006
Re: How to setup second NIC in Network Probe
Posted: May 13, 2008 9:31 AM
  Reply

Hi,

Network Probe can only monitor one NIC at a time. To monitor two span ports you would need to machines running Network Probe.

Regards
Markus Voss
ObjectPlanet, Inc

luvizon

Posts: 1
From: Porto Alegre
Registered: Sep 18, 2008
Re: How to setup second NIC in Network Probe
Posted: Sep 18, 2008 8:23 PM
  Reply

Hi,

Network Probe still cant monitor only 1 NIC at a time???

If I create an virtual interface, like a load balance, and monitor that traffic??

Im using a SuSe 11.


Message was edited by: luvizon




© 1998-2019 ObjectPlanet, Inc. Øvre Slottsgate 5, 0157 Oslo, Norway Tel (+47) 2233 3360 | Fax (+47) 2233 3361