Customer login  |   Contact us
Home Company Products Support Purchase
Forum Home » Network Probe

Topic: New user - question before we purchase
Replies: 2   Pages: 1   Last Post: Jun 22, 2007 6:13 PM by: alexc

Back to Topic List Back to Topic List
Replies: 2   Pages: 1  

Posts: 1
From: Louisville, KY
Registered: May 10, 2005
New user - question before we purchase
Posted: May 10, 2005 3:16 PM

I believe the software is exactly what we are wanting. But right now I am running the software from my machine although I am not getting everyones IPs. Where on the network should the server be that is running the software. I assume one of the backbone switches, but still not sure that will gather all the data across the entire network. Including those coming from the lan.

Eivind Pedersen

Posts: 473
From: Oslo, Norway
Registered: Jun 11, 2002
Re: New user - question before we purchase
Posted: May 11, 2005 12:32 PM

Connecting it to a span port on one of the backbone switches would be good. It should see all ingoing and outgoing traffic.


Posts: 2
Registered: Jun 22, 2007
Re: New user - question before we purchase
Posted: Jun 22, 2007 6:13 PM

I too am new to your Network Probe product. It appears to be exactly what I am looking for. I have the probe connected to a Cisco Catalyst 3550 switch that is in "monitor" mode. I see plenty of traffic(odd ports), however I do not see any of the "normal"(21,23,25,80,110) traffic. Any suggestions? I had my Cisco guru look over the config of the switch port and says all is fine. This is a major sales point for our company as we are a Telco/ISP.

© 1998-2019 ObjectPlanet, Inc. Øvre Slottsgate 5, 0157 Oslo, Norway Tel (+47) 2233 3360 | Fax (+47) 2233 3361