Customer login  |   Contact us
Home Company Products Support Purchase
Forum Home » Network Probe

Topic: Adding ports
Replies: 1   Pages: 1   Last Post: Sep 28, 2004 2:35 PM by: Bjorn J. Kvande »

Back to Topic List Back to Topic List Topics: [ Previous | Next ]
Replies: 1   Pages: 1  
Adding ports
Posted: Sep 27, 2004 3:24 PM


I've got the following question. Some users logon to an ftp site via Internet Explorer. This is the following site: People download files from that site, but when I look within Probe and look for the Ip adress of the workstation where is logged on to the site, I cannot see that there is more network-traffic. How can I fix this?



Bjorn J. Kvande
Re: Adding ports
Posted: Sep 28, 2004 2:35 PM

The actual port used to transfer files might still be FTP-data (20). It might also use PASV FTP transfer mode, in which case the port numbers are dynamicall assigned for each transfer. In this case, Network Probe collects all these ports under FTP-data (20).

Port 8000 is registered as iRDMI in the config/iana_port_numbers.ini file under the Network Probe installation directory.

Bjorn J. Kvande
ObjectPlanet, Inc.

© 1998-2019 ObjectPlanet, Inc. Øvre Slottsgate 5, 0157 Oslo, Norway Tel (+47) 2233 3360 | Fax (+47) 2233 3361