Customer login  |   Contact us
Home Company Products Support Purchase
Forum Home » Network Probe

Topic: Harware requirements
Replies: 1   Pages: 1   Last Post: May 15, 2006 3:03 PM by: Eivind Pedersen


Back to Topic List Back to Topic List
Replies: 1   Pages: 1  
jnebrera

Posts: 1
Registered: May 11, 2006
Harware requirements
Posted: May 11, 2006 6:54 PM
  Reply

Hi all,

Sad to say, we used to purchase this product until 1 year ago but we stopped due to some stability problems (maybe our fault). We decided to follow a different road and went for NetFlow stuff.

Now, a client asked us to view real time traffic to compare it against Allot. We already have some statistic solution but would like to evaluate Networks Probe to be able to offer them a fast solution.

What hardware is recommended to sustain about 1 hour of traffic data with more or less 10Mbps troughput (20 in total). Data older than this 1 hour will be completelly removed / erased / zipped but I need 1 hour of quite precise data (like 5 sec polling)

We would like to have at least stats for app and IP and the combination of both. No need for MAC stuff.

Thanks for your help. Regards.

Eivind Pedersen

Posts: 473
From: Oslo, Norway
Registered: Jun 11, 2002
Re: Harware requirements
Posted: May 15, 2006 3:03 PM
  Reply

I would suggest at least a 2 GHz CPU with and 1 GB memory. We have ran it on testbeds with about 10MB/s throughput without any problems.
You should set the probe to reset at least 2 times a day, otherwise the memory would be filled up quite fast.



© 1998-2019 ObjectPlanet, Inc. Øvre Slottsgate 5, 0157 Oslo, Norway Tel (+47) 2233 3360 | Fax (+47) 2233 3361