Customer login  |   Contact us
Home Company Products Support Purchase
Forum Home » Network Probe

Topic: 2 Network Cards
Replies: 0   Pages: 1  


Back to Topic List Back to Topic List
Replies: 0   Pages: 1  
dmherp

Posts: 1
Registered: Jul 2, 2009
2 Network Cards
Posted: Jul 2, 2009 1:21 AM
  Reply

I have 2 network cards in my machine - one with an ip address and one without. I can start the probe with -noip eth2 and if I look in the Setup section on the web page it indicates that it is connected to eth2. I have eth2 connected to a span port on a Cisco switch that is seeing all our Internet traffic. My problem is that the probe is still only seeing the traffic on the subnet that eth1 is connected to. Any ideas?



© 1998-2019 ObjectPlanet, Inc. Øvre Slottsgate 5, 0157 Oslo, Norway Tel (+47) 2233 3360 | Fax (+47) 2233 3361